一类压缩型映射的不动点定理

在完备的度量空间中,讨论了一类新型的非线性压缩映射ρ(Tx,Ty)≤a(ρ(x,y))ρ(x,Tx)+b(ρ(x,y))ρ(y,Ty)+c(ρ(x,y))ρ(x,y)通过构造迭代序列,指出该映射的不动点的存在性和唯一性,并给出相应的误差估计式,拓展和改进了有关文献的范围.     

Enhancing signal-to-noise ratio and resolution in low-field NMR relaxation measurements using post-acquisition digital filters

The traditional way to enhance signal-to-noise ratio (SNR) of nuclear magnetic resonance (NMR) signals is to increase the number of scans. However, this procedure increases the measuring time that can be prohibitive for some applications. Therefore, we have tested the use of several post-acquisition digital filters to enhance SNR up to one order of magnitude in time domain NMR (TD-NMR) relaxation measurements. The procedures were studied using continuous wave free precession (CWFP-T₁) signals, acquired with very low flip angles that contain six times more noise than the Carr–Purcell–Meiboom–Gill (CPMG) signal of the same sample and experimental time. Linear (LI) and logarithmic (LO) data compression, low-pass infinity impulse response (LP), Savitzky–Golay (SG), and wavelet transform (WA) post-acquisition filters enhanced the SNR of the CWFP-T₁ signals by at least six times. The best filters were LO, SG, and WA that have high enhancement in SNR without significant distortions in the ILT relaxation distribution data. Therefore, it was demonstrated that these post-acquisition digital filters could be a useful way to denoise CWFP-T₁, as well as CPMG noisy signals, and consequently reducing the experimental time. It was also demonstrated that filtered CWFP-T₁ method has the potential to be a rapid and nondestructive method to measure fat content in beef and certainly in other meat samples.     

Effects of graded porous structure on local strain distribution under compression in silicone rubber

Silicone rubber samples with gradually changing pore sizes within the range of 70–610 μm are produced using an improved spacer method. The samples are scanned using an X‐ray computed tomography to evaluate their graded structure as compared to uniform rubber. A compressive test reveals that graded porous silicone rubber has characteristic stress–strain curves whose slope changes within a specific strain range depending on the porous structure. Analysis results of local strain based on a digital image correlation of the graded porous silicone rubber under compression demonstrate that the characteristic stress–strain properties are caused by shifts in the main deformation region in the graded structure. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1033–1042     

Compressing strongly connected subgroups in social networks: An entropy-based approach

To detect and study cohesive subgroups of actors is a main objective in social network analysis. What are the respective relations inside such groups and what separates them from the outside. Entropy-based analysis of network structures is an up-and-coming approach. It turns out to be a powerful instrument to detect certain forms of cohesive subgroups and to compress them to superactors without loss of information about their embeddedness in the net: Compressing strongly connected subgroups leaves the whole net’s and the (super-)actors’ information theoretical indices unchanged; i.e., such compression is information-invariant. The actual article relates on the reduction of networks with hundreds of actors. All entropy-based calculations are realized in an expert system shell.     

三维空间中带非线性阻尼项的等熵欧拉方程组轴对称解的爆破

研究了三维空间中带非线性阻尼项的可压缩等熵欧拉方程组Dirichlet初边值问题.采用泛函方法,定义几种不同的泛函,当初始速度足够大时分别得到了经典解在某一时间内必定爆破的结论.由于出现了非线性阻尼项,较之线性阻尼的情形,经典解爆破的难度随之增加.     

Ni(OH)2修饰的三聚氰胺泡沫用于可压缩超级电容器电极

通过化学镀和电化学镀的方法制备了一种Ni(OH)₂电化学活性材料修饰三聚氰胺泡沫(MF)可压缩骨架的超级电容器电极材料MF/Ni(OH)₂。MF/Ni(OH)₂可压缩电极材料表现出最佳的电容性能,例如循环稳定性(即使在40 mA/cm^-3的电流密度下经过2000次充放电循环后,可压缩电极仍能保持90.63%的初始电容)和可压缩稳定性(即使在压缩率为50%时,仍具有97.88%的电容保持率)。层状可压缩超级电容器由MF/Ni(OH)₂弹性材料作为阳极,镍/碳(Ni/C)为阴极以及实验室中常用的滤纸作隔膜材料组成。这种超级电容器装置在不同的压缩下表现出良好的电化学性能和优异的压缩稳定性。最后,使用可压缩的超级电容器来点亮LED灯,以展示其在柔性电子设备中的应用。这些优化的电化学和机械性能表明MF/Ni(OH)₂可作为可压缩超级电容器的应用中的候选电极。     

冲击作用下凝聚态含能材料热点形成热－机械分析

应用动力有限元方法分析含能材料中热点形成机理。在假定凝聚态含能材料为可压缩的情况下，研究圆形和椭圆形微孔洞附近介质在冲击作用下热－机械响应过程，结果显示冲击波强度、空隙率、微孔洞尺寸和形状、熔点对热点温升有强烈影响，并讨论粘塑性功和固相压缩成为主要机制的条件。     

一种用于金属薄板轴向拉压疲劳试验的防弯夹具

在金属薄板的轴向疲劳S-N曲线测试中,研究将一种侧向防弯曲夹具应用于存在压向载荷的试验。通过粘贴应变片方法测量试样的表面应力,对试样的受力情况做了定量的分析。测量结果表明试样安装防弯曲夹具后,基本消除了由压缩失稳产生的弯曲应力。且通过对不同拧紧方式的测量,表明一定的夹紧力下不对试验力产生影响。试验夹具设计成对试样中心轴线的支撑而让边缘疲劳敏感部位处在非接触状态,试样断口表明疲劳起源在这些并没有与试样接解的部位。用钛和铝两种材料的薄板在不同试验机上进行了不同寿命和频率的试验,试验结果与正应力比试验同时给出以对比,各种研究表明本试验有效解决了薄板疲劳受压时的失稳问题。